STRYDE Home — bathroom remodeling, renovation, restoration and rental turnovers336-892-8181
Renovation Services

Window Replacement in Raleigh, NC

New windows only perform as well as the flashing and sealing behind them. We replace windows across Raleigh with an eye on the opening itself — rotted sills, missing flashing tape, gaps that were never air-sealed — not just the sash.

Fully Insured

General liability & workers' comp coverage

IICRC Certified

Restoration work in Raleigh to IICRC standards

1-Year Workmanship Warranty

On our labor; excludes normal wear and tear

Financing Available

Flexible plans on approved credit

Local to Raleigh

What window replacement looks like in Raleigh

Older single-pane wood windows are still common in neighborhoods like Five Points, Hayes Barton, and homeowners there are often balancing energy performance against keeping a historic look from the street. We offer options that hold sightlines close to original while cutting drafts significantly.

Inside the beltline we plan for plaster, cast-iron waste lines and 1920s framing that has never been square, plus the Historic Overlay District review that governs exterior changes in Oakwood and Boylan Heights. In the ranch belt the recurring job is a 5-foot alcove tub becoming a tiled walk-in shower, which usually means moving a drain across joists — we confirm joist direction before quoting so the price holds. In the newer north and northwest neighborhoods it's builder-grade finishes reaching end of life all at once, and an HOA architectural submittal for anything on the outside. Raleigh reviews permits through its own Development Services office rather than Wake County, and we file, schedule and meet those inspections ourselves.

Neighborhoods served
  • Five Points
  • Hayes Barton
  • Oakwood
  • Mordecai
  • North Hills
  • Brier Creek
  • Wakefield
  • Boylan Heights
  • Cameron Village
  • Falls River
  • Fully insured
  • Written scope, fixed price
  • One accountable project lead
What's included

Our window replacement scope in Raleigh

Every step below is written into your scope before work begins — no verbal promises. Bathroom remodeling leads in Raleigh, followed by whole-level flooring and paint; restoration calls cluster around older inside-the-beltline plumbing.

Step 1

Opening assessment

Sill and framing checked for rot or water damage before ordering replacement units.
Step 2

Product selection

Vinyl, fiberglass or wood-clad options matched to your budget and the home's look.
Step 3

Removal and flashing

Old sashes and frames removed, opening properly flashed and air-sealed.
Step 4

Install and trim

New units set, insulated, and interior and exterior trim finished to match.
On the ground in Raleigh

What we plan for on Raleigh renovation services jobs

Whole-level flooring runs are the most common Raleigh renovation, and level tolerance is the constraint. Older inside-the-beltline floors need leveling before long LVP or hardwood runs, and HOA neighborhoods need architectural approval before any exterior product is ordered.

Inside-the-beltline streets are narrow with limited on-street parking, so dumpsters and deliveries are staged deliberately and neighbors keep their access. Oakwood and Boylan Heights add historic overlay review to exterior scopes, and Raleigh inspects separately from Wake County, which drives sequencing.

Permitting: work involving plumbing relocation, new circuits or structural change is permitted and inspected through the City of Raleigh Development Services Department, or Wake County for addresses in the unincorporated county. We file and manage that as part of the project.

Conditions we see in Raleigh
  • Plaster, cast-iron waste and out-of-square framing in the pre-war blocks around Five Points, Oakwood and Hayes Barton
  • Five-foot alcove tubs on ranch-belt slabs and crawlspaces where a walk-in shower means moving a drain across joists
  • Builder-grade finishes reaching end of life all at once in the post-2000 Brier Creek and Wakefield build-out
Our standards

How we work in Raleigh

We don't publish testimonials we can't verify. Here's what we can put in writing — plus real projects you can look at.

See recent projects

Fully insured

General liability and workers' compensation coverage. Certificates of insurance available on request.

IICRC certified

Restoration work follows IICRC standards for water mitigation, drying and mold remediation — documented for your carrier.

1-year workmanship warranty

Our labor is warranted for a year. Normal wear and tear isn't covered; manufacturer warranties on materials apply separately.

Worked with us before? Leave a review — we publish every verified one, good or bad.

FAQ

Window Replacement in Raleigh — common questions

Will new windows meet historic district rules in Raleigh?

In districts with design review, window replacements typically need approval to preserve sightlines and materials from the street. We handle that application and select products that qualify.

How much difference does replacement actually make?

On homes with original single-pane wood windows, replacement is usually one of the highest-impact comfort and efficiency upgrades available, well ahead of insulation top-ups in most cases.

How long does a whole-house window replacement take?

A typical 12–18 window home takes two to four days once units are manufactured and delivered.

Who permits window replacement work in Raleigh, NC?

Permitted work is reviewed and inspected through the City of Raleigh Development Services Department, or Wake County for addresses in the unincorporated county. Plumbing relocation, new circuits and structural changes require a permit; like-for-like fixture swaps, flooring and painting generally do not. We file, schedule and meet the inspections ourselves.

What should I expect on site in Raleigh?

Inside-the-beltline streets are narrow with limited on-street parking, so dumpsters and deliveries are staged deliberately and neighbors keep their access. Oakwood and Boylan Heights add historic overlay review to exterior scopes, and Raleigh inspects separately from Wake County, which drives sequencing. The most common conditions we plan for here: plaster, cast-iron waste and out-of-square framing in the pre-war blocks around Five Points, Oakwood and Hayes Barton; five-foot alcove tubs on ranch-belt slabs and crawlspaces where a walk-in shower means moving a drain across joists; builder-grade finishes reaching end of life all at once in the post-2000 Brier Creek and Wakefield build-out.

Service area

Our coverage around Raleigh, NC

We work throughout Raleigh and roughly 25 miles out — crews are dispatched daily across the Triangle market.

Bold design. Flawless craftsmanship. Built to last.

Get a fixed price for your Raleigh project

Tell us what you're planning. We'll walk the space, put a written scope and fixed price in front of you, and give you a real start date.

336-892-8181Free Estimate